OmniPrint FREEJET 330TX, Официальное руководство пользователя

Страница: 7 / 71

Control Panel & Shortcuts List
Power Up:
Hold down “POWER” button for 4 seconds or until you hear a beep
Auto Head Clean:
Hold down “FEEDING” button for 4 seconds or until beep
Raise or Lower Platen Height:
Hold “UP” or “DOWN” button
Move Gantry Forward:
Press “FRONT” until half-way across the platen
Gantry to Print-Ready Position:
Press “STAND-BY” once
Gantry to Home Position:
Press “STAND-BY” once
Start Pump for Ink Fill/Prime:
Press “POWER” and “DOWN” at the same time
Stop Pump:
Press “FUNCTION” button once
Move Printhead From Wet Cap:
Press “FUNCTION” and “UP” at the same time
Return Printhead to Wet Cap:
Press “FUNCTION” button once
Change Layers:
Press and hold fown the “FUNCTION” button for 4 seconds then release the
button. The Status light should now be purple. Press “UP” and “DOWN” to choose your layer.
Press “FUNCTION” once to confirm your layer selection. Refrain from using layers C & D!
Keypad Shortcuts List
Caution: Never use the “REAR” button when the Print Carriage is at the front in Print-Ready position. Never
use the “FRONT” button to put the printer in Print-Ready position. Always use the “STAND-BY” button.
POWER
Mainly used to turn
the printer on or off
FUNCTION
Mainly used to change
the printer’s layer settings,
setting auto-height, & other
shortcut commands
FEEDING
Mainly used to auto-head
clean, stop a print job, &
other shortcut commands
FRONT
Mainly used to manually
move the gantry forward
to the front of the printer
STAND-BY
Mainly used to move the
gantry to the print-ready
position at the front of the
printer or back to standby
REAR
Mainly used to manually
move the gantry to
the back of the printer
UP
Mainly used to manually
move the platen up toward the
laser sensors on the printer
DOWN
Mainly used to manually
move the platen down
away from the laser sensors
on the printer.
LAYER SETTING
Used to signify what the layer
setting that your printer is set
to whether A or B. Layer A is for
light garments & Layer B is for
dark garments. Avoid using
C or D.
4