manualshive.com logo in svg

OmniPrint FREEJET 330TX, Официальное руководство пользователя

Поделиться
Скачать
OmniPrint FREEJET 330TX Скачать руководство пользователя страница 39

FreeJet Maintenance (Cont’d)

Monthly Maintenance (Cont’d)

3. When all of the corner pins have been opened, you 
may remove the cover.

4. Switch off the back switch on the back of your printer.
The printer must be completely off in order to properly 
clean the encoder wheel.

5. Using 70% isopropyl alcohol and a lint-free cloth, 
gently pinch the encoder wheel; similar to how you 
would pinch the encoder strip. The wheel must now be 
manually rotated.

6. While still gently pinching the encoder wheel, push 
and pull the entire print carriage as needed to manually 
rotate the encoder wheel, allowing you to clean all of it.
Push the carriage with your hand on the center so that 
it is moved evenly.

7. When you’re finished cleaning the encoder wheel, 
return the carriage back to the home position.

8. Replace the access cover over the encoder wheel.

(Continued On The Next Page)

36

Содержание FREEJET 330TX








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды