manualshive.com logo in svg

OmniPrint FREEJET 330TX, Официальное руководство пользователя

Поделиться
Скачать
OmniPrint FREEJET 330TX Скачать руководство пользователя страница 37

FreeJet Maintenance (Cont’d)

Monthly Maintenance (Cont’d)

Monthy Maintenance List:

�

 Lubricate the Carriage Bar

� Clean the Encoder Wheel

This is the Print Carriage Bar, the large chrome bar in the printer that the printhead uses to move left and right.

How to Lubricate The Carriage Bar

While the printhead is moved away from the Wet Cap Station, you will need to clean off any build-

up on the carriage bar with a clean cloth and lubricate it using the Blue Grease.

Over time, you will begin to notice a black build-up on the 

print carriage bar. 

1. Using a clean cloth only, wipe the carriage bar to clean off 

all of the build-up.

2. Apply a small coat of Blue Grease onto the carriage bar.

3. Move the printhead from left to right using your hand to 
evenly distribute the grease across the carriage bar.

(Continued On The Next Page)

34

Содержание FREEJET 330TX








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды