Omnia Omnia.9, Инструкция по установке и эксплуатации

Страница: 91 / 127

83
The Undo Pre menu lets you listen to the audio of each individual Undo band before it
enters the entire Undo chain.
The Undo Post menu lets you listen to the audio of the Undo section, or to each individual
Undo band after it has been processed by Undo but before it enters the main audio
processing core.
The Multiband DRC Solo menu lets you listen to the audio after the Parametric EQ, in each
of the AGC, Wideband 1, and Wideband 2 sidechains, and at the output of each individual
band of the Multiband processing section.
Streaming 1, Streaming 2, and Streaming 3 Patch Points
You can feed each of the three Monitor Outputs audio from various points within each of the
Streaming processing cores.
The I/O menu allows you to listen to either the Program Input or the Digital Output of each
Streaming processing core.
The De-­‐clipper menu lets you monitor the audio either before or after the De-­‐clipper.
The Undo Pre menu lets you listen to the audio of each individual Undo band before it
enters the entire Undo chain.
The Undo Post menu lets you listen to the audio of the Undo section, or to each individual
Undo band after it has been processed by Undo but before it enters the main audio
processing core.
The Undo Control Signal menu lets you monitor the control signal of each of the Undo
bands. Because this patch point monitors a signal rather than audio, it is designed to be
viewed in an Oscilloscope window.
The Multiband DRC Solo menu lets you listen to the audio after the Parametric EQ, in each
of the AGC, Wideband 1, and Wideband 2 sidechains, and at the output of each individual
band of the Multiband processing section.
Load Preset Menu
Because Omnia.9 provides all of the tools – minus a calibrated microphone – to perform
speaker/room calibrations for each of the Monitor Outputs, it also provides a way for you to store
those calibrated settings in the form of presets. It is important to remember that this menu refers
to presets you create and save yourself for speaker calibrations within each of the three Monitor
Outputs. These are not the same as your processing presets! However, the menus work in the
same way.