54
Oscilloscope Menu
The Oscilloscope menu allows you to monitor a very wide variety of input and output points from
various stages of Omnia.9’s processing sections on the built-‐in oscilloscope.
The Delay control works the same here as it does previous and subsequent display sections.
The Oversampling control enables or disables the oscilloscope’s 4x oversampling function.
Without oversampling, some peaks may pass through without being displayed, giving an
inaccurate view of the signal. This is most critical when monitoring the MPX Output.
However, since oversampling consumes more CPU resources, it is turned off by default.
The Phosphor Persistence control adjusts how long latent images remain on the screen. A
setting of 0 provides no image delay at all and offers the greatest amount of visual detail for
the current information on the scope. Higher settings allow images of signal that has
already passed through the scope to remain on the screen for progressively longer periods
of time. Setting this control all the way to the right keeps the image from fading at all,
useful for catching peaks.
The Gain control adjusts the Y scale of the oscilloscope and moves the grid relative to the
signal.
The Lines control adjusts the offset of the reference lines as measured in dB.
The Zoom control
allows you to choose between a 1x, 2x, and 4x view of the X scale,
similar to setting the sweep time of a traditional oscilloscope.
The I/O (Input/Output) allows you to view the audio signal at various points of the Program
Input, MPX Output, MPX Decoded Output, or L/R MPX Output paths.
o
From the Program Input menu, you can view the left or right input audio signal.
o
From the MPX Output menu, you can view the Multiplex, left de-‐modulated, right
de-‐modulated, left de-‐emphasized, or right de-‐emphasized audio signal as well as
the pilot tone.
o
From the MPX Decoded menu, you can view the left or right MPX Decoded audio
signal.
o
From the L/R MPX Output menu, you can view the Multiplex, left de-‐modulated,
right de-‐modulated, left de-‐emphasized, or right de-‐emphasized audio signal as well
as the pilot tone.
From the De-‐clipper menu, you can view the audio signal before or after de-‐clipping in
either the left or right channels.
Содержание Omnia.9
