Omnia Omnia.9, Инструкция по установке и эксплуатации

Страница: 54 / 127

46
The Attack Speed and Release Speed controls work in the same manner as their
counterparts in the other sections of the Omnia.9, however, the behavior of the multiband
AGC compressors is also program-­‐dependent.
The Attack (coupled) control allows you to adjust the attack speed of all of the bands
simultaneously by an equal amount.
The Release (coupled) control allows you to adjust the release speed of all the bands
simultaneously by and equal amount.
The Speed control allows you to adjust both the Attack speed and Release speed of all the
bands simultaneously by an equal amount.
The attack and release speeds of the multiband limiters are program-­‐dependent not adjustable.
Multiband Thresholds Menu
The Multiband Thresholds menu allows you to set the target for each of the Multiband AGC bands
as well as the threshold for each band of the Multiband Limiters. The total number of bands
available in the Multiband Thresholds section is determined by the number of bands of processing
used in the Current Preset.
The AGC Target controls set the target output level of each band of the Multiband AGC. A
lower setting provides a lower output level, while a higher setting provides a higher output
level. These controls have a range between +12 and -­‐12dB in one-­‐tenth dB increments.
The Limiter Threshold controls determine at which point the Multiband Limiter acts upon
the incoming audio for its particular band relative to its corresponding AGC Target. For
example, a setting of +6dB means that any peaks of less 6dB above the AGC Target level will
not be processed by the limiter. These controls have a range between +18 and 0dB in one-­‐
tenth dB increments.