Omnia Omnia.9 Скачать руководство пользователя страница 73

Страница: 73 / 127

RDS Titles Menu

The RDS Titles Menu provides fields for entering Program Service (PS) and Radio Text (RT)
information.

Typically, the PS field – an 8-‐character static display – contains the call letters of the station

– for example. WOMN-‐FM. However, it is possible to program the PS field in such a way that

it can provide a bit more information. Here are some ways to creatively use the PS field:

By splitting text with the “/” symbol, each text will alternate for 3 seconds. (WOMN-‐

FM/88.5 FM/NOW WITH/OMNIA.9) or (WOMN-‐FM/TODAYS/HOTTEST/HITS)

To change the amount of time the text is displayed, put the desired time in front of

the text in seconds (1.5s:WOMN-‐FM/3.0s:88.5 FM/1.5s:OMNIA.9). In this example,

“WOMN-‐FM” will be displayed for 1.5 seconds, “88.5 FM” will be displayed for 3

seconds, and “OMNIA.9” will appear for 1.5 seconds.

The RT field provides a 64-‐character free-‐form message. It can be static to provide a station

slogan, or dynamic and in sync with station programming to provide song titles and artist

information.

Содержание Omnia.9
































































































































Результаты поиска

Содержание Omnia.9

Отзывы:

Бренды по названию

Популярные бренды

Omnia Omnia.9, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Omnia.9

Отзывы:

Бренды по названию

Популярные бренды