Omnia Omnia.9, Инструкция по установке и эксплуатации

Страница: 34 / 127

26
When the dynamics detector falls below a certain level, expansion will begin, starting at a
minimum ratio of 1:1 and increasing to a maximum ratio of 4:1. The point at which that
expansion begins to occur is set by the Expansion Start control in each band.
The relative point at which the expansion reaches its full 4:1 ratio is determined by the
setting of the Transition Width control in each band.
The detected amount of dynamics in each band is indicated in the Dynamics meters. Taller bars
indicate more inherent dynamics in the music, while shorter bars indicate less dynamics and are
generally the inverse of the Expansion Ratio meters. The result of settings in the Dynamics Detector
to Ratio menu can be observed on the Expansion Ratio meters in the Undo Meter Window.
Density Detector Band Weighting
Each band of Undo’s expander has a corresponding density detector. The Density Detector Band
Weighting controls allow you to determine how much control each detector provides its own band
as well as any other expander band. To put this concept into traditional processing terms, it is
similar to “band coupling” in a multiband compressor, where all bands may operate completely
independently of one another or may influence one another by way of coupling to varying degrees.
Detected
Dynamics
Expansion
Ratio