Omnia-6ex Use and Operation Manual – V: 1.20
45
Save to Card
Stores the Schedule and daypart information on the Omnia PC Card. You might do this for safety or even for sharing
the data with other Omnia-6 processors. It saves all of the currently defined dayparts and the daypart state to the
Omnia PC card. These settings can be loaded later by selecting Load from Card.
Current State
Turns the Schedule function on and off. When Disabled, the Scheduler runs but does not load presets. When
Enabled the Scheduler automatically loads presets following the daypart schedule that is set up in the current
Schedule.
System
This menu allows you to perform housekeeping
on the Omnia-6 operating system. Many items on
this menu are available only to those having
Level 3 security access. There are sixteen
parameters or selections: About, Change
Password, Lock Unit, Load Defaults, Load from
Card, Save to Card, Network, Security Config,
Current Time, Current Date, Port Baud, Security
Level, Backlight, Reboot System, NTP, and
Reset Passwords.
System Menu
Port Baud
This option sets the rear panel RS-232 communications port parameters between 9,600 baud, 19,200 baud and
57,600 baud. The factory default is 19,200 baud.
Security Lev(el)
It is advisable for the user interface to be password-protected for controlled access. There are three levels of
password protection:
In levels 1 and 2, the visibility of each menu (except System) can be set in the Security Config screen. (see Page 47)
Level 1, User, allows access only to the Menus selected in the Security Config window, parts of the System Menu
and the headphone level control. The default password for this level is “user” (all lower case).
Level 2, Advanced User, allows access only to the Menus selected in the Security Config window, parts of the
System Menu and the headphone level control. The default password for this level is “advuser” (all lower case).
Level 3, Master or Engineer level, allows access to all menus. The default password for this level is “engineer” (all
lower case).
There is a “Stealth Mode” option that suppresses the gain reduction metering and the current Preset Name when the
Содержание Omnia-6EX
Страница 113: ...Omnia 6ex Use and Operation Manual V 1 20 113 Omnia 6...
Страница 114: ...Omnia 6ex Use and Operation Manual V 1 20 114...
