OMEGAbilance FREESTYLE COMPACT CS, Руководство пользователя

Страница: 6 / 92

INSTALLING THE SCALE
POWER SUPPLY
The installation of this scale must be done with great care and attention, in order to ensure
maximum operating safety of the equipment.
Therefore it is essential to strictly observe the following rules:
-
Power the scale with a preferential line (220 V ± 10% - 50 HZ) that starts directly from the
meter or from the distribution panel, avoiding that it connects other equipment with high
absorption (refrigerator compressors, slicers, neon lamps, etc. ). The power supply line of
the instruments must be connected to a single electrical phase to avoid imbalances in the
interconnections of the scales.
-
Install a socket with side earth contacts (SCHUCO) for each scale; the connection to the
earth line is essential to allow the anti-disturbance filter, with which the scale is
equipped, to work correctly and to intervene when necessary to eliminate them. It is also
advisable that auxiliary sockets useful for test instruments are available near the scales.
ATTENTION! AN ELECTRIC LINE WITHOUT AN EARTH WIRE COULD CAUSE IMPROPER
OPERATION OF THE SCALE OR DAMAGE TO ITS ELECTRONIC CIRCUITS. THEREFORE, WE
DISCLAIM ANY LIABILITY FOR ANY OPERATING DEFECTS OR FOR ACCIDENTS TO THE
OPERATORS RESULTING FROM THE NON-COMPLIANCE OF WHAT WE RECOMMEND.
Freestyle Compact user manual
Rev.1 Page 6 of 92