OMEGAbilance FREESTYLE COMPACT CS, Руководство пользователя

Страница: 86 / 92

-
the weight calculated on the number of internal divisions expressed in kilograms (with resolution to the
tenth of a gram)
-
the number of internal divisions
EVENTS (calibration)
This menu is available to the metric inspectors. The dates corresponding to the calibration and
calibration of the weight system carried out by authorized personnel are shown on the screen.
By pressing the " F4 "the information on the screen will be printed.
PRINTER
You can make all printer adjustments including the type of thermal head installed (2 or 3
inch).
With the exception of the menu for choosing the thermal head adopted, all menus
automatically perform a print to test the efficiency of the thermal head; any problems with
the thermal head will be highlighted by printing white or black lines during the test. In this
case, call the After-Sales Service as errors may occur in the barcode printing.
Paper advance
It represents how much the receipt must have advanced after the end of the printing of the last line of the
receipt itself; this in order to facilitate the cutting of the receipt.
The default value is 20, and each number corresponds approximately to an advance of 2 millimeters.
Step (labels)
It is the regulation of the advancement of the label in order to facilitate the removal of the label itself. Each
number corresponds approximately to an eighth of a millimeter advance.
To facilitate the determination of the required step value, the "Help" function ("HELP") is available. By
pressing the "shift" and "F1" keys, a step value is automatically detected which will require at most small
adjustments.
Intensity
The print intensity is adjusted by varying the intensity value, normally 5, from 1 to 9. By
pressing the "
F4 "you will get the print of the contrast.
Inch Head
Set 2 or 3 inches according to the thermal head installed in the scale.
To position yourself on the fields to be modified, use the "-" and "-" keys (down arrow and up arrow), enter
the data to be modified, confirm the entered data by pressing " ENTER ”Or cancel the change by pressing" C
". Press the "F1" key to store all the changes made or press "Esc" to exit the menu without storing.
Freestyle Compact user manual
Rev.1 Page 86 of 92