PROGRAMMING
The programming of a function key is performed by describing the sequence of keys necessary to
perform the chosen function. In practice, carry out the operation by marking all the keys that are
pressed to do it. In this phase it is possible to modify or insert a function previously stored with
“REGISTER KEYS”.
By pressing the "
F4
"You will get the information about the function key printed; as large amounts
of data are printed, the print function requires the use of a roll of continuous thermal paper.
Key
When the cursor is positioned under "Key", with the "Help" function ("help", "shift" and "F1" keys
simultaneously) select the key to simulate. It is also possible to establish conditions for carrying out
different operations with the same key based on the configuration of the scale (if master scale ..., if
slave scale ...) or based on certain conditions (if paper ..., if label ...)
Num. Characters
Indicates how many times the selected key must be pressed or a possible jump.
REGISTER KEYS
It is possible to register the key sequence necessary to carry out the chosen operation by executing the
operation once manually. Registration is carried out in the following ways:
-
position the cursor under "Register Keys" and press the "key to confirm"
ENTER
"
-
the message "SYSTEM MESSAGE Waiting function key" asks the operator to press the function key (F1,
F2, shift-F1, etc.) to which to assign the key sequence (and therefore the function)
-
after pressing the chosen function key, a "SYSTEM MESSAGE" is used describing the possible
options
-
to cancel the operation, press the "C" or "ESC" key
-
to continue, turn the key to the vertical position (working position 0); at this point the scale
begins to record all the keys that will be pressed and the relative positions of the programming
key
-
perform the chosen operation
-
at the end of the operation (for example the item programming menu has been opened) press
"shift" and "
ENTER
”(Or" shift "and" print "for AS model scales) to store the sequence
-
In case the function key is formed by shift-PLUx, it is asked whether to continue (key
ENTER
) or
terminate (key
C.
). When these macros are enabled, they allow the operator to enter values at the
points where they continued.
In all cases it is possible, after having registered it, to modify the sequence assigned to a function
key using the programming menu.
PRESS
The information relating to all the function keys is printed; Because large amounts of data are
printed, the print function requires the use of a continuous thermal paper roll.
Freestyle Compact user manual
Rev.1
Page 82 of 92
Содержание FREESTYLE COMPACT CS
