OMEGAbilance FREESTYLE COMPACT CS, Руководство пользователя

Страница: 34 / 92

ERROR MESSAGES
PAPER ERROR
It signals the end of the labels or the paper roll. The same error is also displayed if a roll of paper or
labels incompatible with the programmed operating mode has been inserted in the scale. In the case
of using LABELS, the label format to be used must be modified and the STEP in programming the
printer parameters must also be adapted.
DATA ERROR
An error occurred while reading the internal archive of the scale: switch the scale off and on again. If
the message reappears, call the After-Sales Service.
ERROR IN TRANSACTIONS
An error has occurred in the management of operator receipts: switch the scale off and on again.
message reappears call the After-Sales Service.
If the
PRINTER ERROR
An error has occurred in the management of the scale printer: switch the scale off and on again. If the
message reappears, call the After-Sales Service.
ERR. PRINTER: illegal format
The operator tried to carry out a weigh but a non-existent label format is requested in the
selected article; check the accuracy of the data of the chosen article and, if correct, verify the
existence of the label format referred to by the article.
FAILED
The scale has made a request for data to its MASTER or SUBMASTER and has not received any response. To
restore the connection, follow the instructions described in the "Master Absent" paragraph.
ALREADY PRESENT
The scale has the same network number as another scale already running in the system. The scale must
therefore be assigned a different network number.
At the
BATTERY INDICATOR
When this indicator comes on, it warns the operator that the scale is working with internal
batteries. Check the power supply line of the balance (power cable disconnected, main switch off,
etc.), the 1.6 A 5x20 type fuse located next to the power cable socket. If the indicator is still on, call
the After-Sales Service.
Freestyle Compact user manual
Rev.1 Page 34 of 92