OMEGAbilance FREESTYLE COMPACT CS, Руководство пользователя

Страница: 17 / 92

A clarification regarding the planning phase of the tracked article if management is used
AUTOMATIC LOTS :
•
The parameter to be attributed to LIST 5 is no longer FIXED (value 1) but becomes the
number of the list in which the TRACEABILITY information has been stored. This value can
change for each single PLU, thus automatically associating different information
corresponding to the list number.
The functioning of the scale differs according to the selected batch management operating mode; the
following methods are implemented:
AUTOMATIC
An article is defined to be tracked through a pointer that associates it with an element of the batch list.
In AUTOMATIC operation, the information contained in the item pointed to are associated with the
article information without requiring any other operation to the operator.
LOT
In the operating mode for LOT, the item must be defined to be tracked by associating it with an element of
the batch list. After selecting the item, the scale displays the lot number present in the associated list, giving
the operator the possibility to confirm the displayed lot or to enter another lot number. If the lot is actually
present in the archive, it will be possible to proceed with the weighing operations, otherwise it will be
signaled to the operator "lot does not exist".
LOT / LIST
In the operating mode for LOT / LIST, the item must be defined to be tracked by associating it with an
element of the batch list. After selecting the item, the scale displays the associated list number, giving the
operator the possibility to confirm it or to enter another list number. If the list is not present in the archive
it will be signaled to the operator "list does not exist", otherwise the operator will be asked to enter the lot
number (therefore no constraint is created between the list and lot number).
LOT / LIST VIS.
The operation mode for LOT / LIST VIEW. behaves like LOT / LIST mode.
As soon as the list number is selected, the data of the selected list are displayed to the operator to allow a
visual check of the data that will be associated with the article.
LIST
In the operating mode for LIST, the item must be defined to be tracked by associating it with an
element of the batch list. After selecting the item, the scale displays the associated list number, giving
the operator the possibility to confirm it or to enter another list number. If the list is actually present in
the archive, it will be possible to proceed with the weighing operations, otherwise the "list does not
exist" will be signaled to the operator.
LIST / DATE
Freestyle Compact user manual
Rev.1 Page 17 of 92