9) Siren sounding, changing sounds every 5 seconds, and lights flashing on and off:
The system is in a triggered state.
10) One siren chirp (and no lights) when the ignition switch is turned "off": The
security system is in Valet Mode.
11) Three siren chirps (and no lights) while the security system is armed: The Prewarn
feature has been activated.
12) A series of siren chirps lasting two seconds when the ignition switch is turned "on":
The Automatic Transmitter Verification
TM
feature has been activated.
The siren is also used to communicate portions of the transmitter code learning, which
is explained in detail on page 22 and programmable features processes.
Page - 19
Continued Next Page
Backup Battery
Backup Battery
Backup Battery
Backup Battery
Backup Battery
This security system includes a 9 volt alkaline battery and a slide bracket holder
which attaches to the security system control module. The 9 volt battery is all that is
required to provide alternative power to operate the system if the vehicle's battery is
disconnected. A built-in protection circuit will not allow the 9 volt battery to back feed
voltage into the vehicle's electrical system.
While on backup battery power, to conserve the backup battery, the system will not
have some functions - flashing exterior lights and the LED Status Indicator. The siren
will still have full sound output, and all trigger circuits will be active except current
sensing and any optional sensors. The Starter Interrupt, however, will work at all times
from battery backup. Replacement 9 volt alkaline batteries can be purchased