![background image](http://html1.mh-extra.com/html/omega/excalibur-al-1000sh/excalibur-al-1000sh_owners-manual_3941126007.webp)
Arming
Arming
Arming
Arming
Arming T
T
T
T
T he System Using
he System Using
he System Using
he System Using
he System Using T
T
T
T
T he
he
he
he
he T
T
T
T
T r
r
r
r
ransmitter
ansmitter
ansmitter
ansmitter
ansmitter
Arming The Security System Using The Transmitter: The security system can
always be armed from the transmitter provided the ignition key is “off”, and the system
is disarmed and not in the Valet Mode. To arm the system, after you exit the vehicle
and close all of the doors, simply press and release the large transmitter button once,
Instantly the exterior and interior lights will flash once, the siren will chirp once and
the LED Status Indicator will begin to flash confirming that the system is armed.
Further, the doors will lock and the starter interrupt relay will prevent any attempt
to start the vehicle. Your security system is now fully armed, and is ready to respond
if an intrusion attempt is detected.
Arming By-Pass: Upon arming, if any sensor circuit is inoperable, that circuit
will be bypassed. For example, if the trunk is left open, you can still arm the system
normally from the transmitter. The bypassed circuit will automatically be reinstated
for protection 5 seconds after that circuit becomes operative, i.e., the trunk is closed.
When a triggered circuit is in a bypassed state, all other operating circuits will be
protected normally.
Sensor By-Pass: Your Excalibur system provides you with the convenient option
of temporarily deactivating the auxiliary sensor (see page 20) without affecting any
other trigger circuit. To deactivate the auxiliary sensor, simply press and release
Page - 7
Continued Next Page