DP6060 Dual-Input Process Meter
Instruction Manual
8
Table of Figures
Figure 1. 1/8 DIN Panel Cutout Dimensions ..................................... 18
Figure 2. Panel Mounting Details ...................................................... 18
Figure 3. Meter Dimensions - Side View ........................................... 19
Figure 4. Meter Dimensions - Top View ............................................ 19
Figure 5. Jumper Configuration for 12/24 VDC Power .................... 20
Figure 6. Transmitter Supply Voltage Selection .............................. 21
Figure 7. Connector Labeling for Fully Loaded DP6060 ................. 22
Figure 8. Power Connections ............................................................ 22
Figure 9. Transmitters Powered by Internal Supply ........................ 23
Figure 10. Transmitter Powered by Ext. Supply or Self-Powered .. 23
Figure 11. Voltage Input Connections .............................................. 24
Figure 12. Relay Connections ........................................................... 24
Figure 13. AC and DC Loads Protection ........................................... 25
Figure 14. Low Voltage DC Loads Protection .................................. 25
Figure 15. F4 Digital Input Connections ........................................... 26
Figure 16. 4-20 mA Output Connections .......................................... 26
Figure 17. Expansion Modules & DIN Rail Mounting Kit ................. 27
Figure 18. External Relays Module Connections ............................. 27
Figure 19. Digital I/O Module Connections ....................................... 28
Figure 20. Interlock Connections ...................................................... 28
Figure 21. Acknowledge Relays w/Function Key or Digital Input .. 62
INTRODUCTION
The DP6060 is a multipurpose, easy to use digital dual-input process meter ideal for
level, flow rate, temperature transmitter, or pressure transmitter applications. It accepts
current and voltage signals (e.g. 4-20 mA, 0-10 V). Various math functions may be
applied to the inputs including addition, difference, absolute difference, average,
weighted average, multiplication, division, minimum, maximum, draw, ratio, and
concentration. This is in addition to the signal input conditioning functions (linear,
square root, programmable exponent, or round horizontal tank calculations).
The displays, relays, and the analog output may be assigned to input channels A or B,
or math result channel C.
Three of the front panel buttons can be custom-programmed for a specific operation.
The basic model includes an isolated 24 VDC transmitter power supply that can be
used to power the input transmitters or other devices. An additional isolated 24 VDC
power supply is included with the 4-20 mA output option. A digital input is standard.
A fully loaded DP6060 meter has the following: four SPDT relays, 4-20 mA output, and
two 24 VDC power supplies. The DP6060 capabilities may be enhanced by adding the
following external expansion modules: four SPST relays –creating an eight-relay dual-
input process meter, two digital I/O modules with four inputs and four outputs each,
serial communication adapters for use with DP6000-SOFT or Modbus RTU, and a dual
4-20 mA expansion module.