DP6060 Dual-Input Process Meter
Instruction Manual
31
Display Functions & Messages
The following table shows the main menu functions and messages in
the order they appear in the menu.
Display Parameter
Action/Setting
Description
setup
Setup
Enter
Setup
menu
Input
Input
Enter
Input
selection menu
Ch-A
*
Input
Set input type for channel A (*or B)
mA
4-20 mA
Set meter for 4-20 mA input
volt
0-10 VDC
Set meter for
10 VDC input
units
Unit
Select the display units/tags
Ch-A
*
Unit
Set unit or tag for channel A (*or B or C)
Dec pt
Decimal point
Set decimal point
Ch-A
*
Decimal point
Set decimal point for channel A (*or B or C)
prog
Program
Enter the
Program
menu
InCAL
Input
Calibration
Enter the
Input Calibration
menu
Ch-A
*
Input A
Set input type for channel A (*or B)
SCAL A
Scale A
Enter the
Scale
menu for channel A
SCAl B
Scale B
Enter the
Scale
menu for channel B
Cal A
Calibrate A
Enter the
Calibration
menu for channel A
Cal B
Calibrate B
Enter the
Calibration
menu for channel B
Inp 1
Input 1
Calibrate input 1 signal or program input 1
value
Dis 1
Display 1
Program display 1 value
Inp 2
Input 2
Calibrate input 2 signal or program input 2
value (up to 32 points)
Dis 2
Display 2
Program display 2 value (up to 32 points)
Error
Error
Error, calibration not successful, check
signal or programmed value
dsplay
Display
Enter the
Display
menu
big
Upper display
Assign the upper display parameter
