![background image](http://html1.mh-extra.com/html/omega/dp6060/dp6060_user-manual_4062237017.webp)
DP6060 Dual-Input Process Meter
Instruction Manual
17
Note:
Testing was conducted on DP6060 meters installed through the
covers of grounded metal enclosures with cable shields grounded at
the point of entry representing installations designed to optimize
EMC performance.
Declaration of Conformity available at www.omega.com
SAFETY INFORMATION
!
CAUTION
:
Read complete
instructions prior to
installation and operation
of the meter.
WARNING
:
Risk of
electric shock or
personal injury.
WARNING!
Hazardous voltages exist within enclosure. Installation and service
should be performed only by trained service personnel.
INSTALLATION
There is no need to remove the meter from its case to complete the
installation, wiring, and setup of the meter for most applications.
Instructions are provided for setting up a 12/24 VDC powered meter to
operate from 12 VDC and for changing the transmitter power supply to
output 5 or 10 VDC instead of 24 VDC, see page 20.
Unpacking
Remove the meter from box. Inspect the packaging and contents for
damage. Report damages, if any, to the carrier.
If any part is missing or the meter malfunctions, please contact your
supplier or the factory for assistance.
Panel Mounting Instructions
Prepare a standard 1/8 DIN panel cutout – 3.622" x 1.772" (92 mm x
45 mm). Refer to Figure 1 below, for more details.
Clearance: allow at least 6.0" (152 mm) behind the panel for wiring.