![background image](http://html1.mh-extra.com/html/omega/dp6060/dp6060_user-manual_4062237047.webp)
DP6060 Dual-Input Process Meter
Instruction Manual
47
Setting the Relay Operation (
relay
)
This menu is used to set up the assignment and operation of the relays.
!
Caution!
During setup, the relays do not follow the input and
they will remain in the state found prior to entering
the Relay menu.
1. Relay
assignment
a. Channel
A
b. Channel
B
c. Channel C (Math channel)
d. Modbus
2. Relay
action
a. Automatic reset only (non-latching)
b. Aut manual reset at any time (non-latching)
c. Latching (manual reset only)
d. Latching with Clear (manual reset only after alarm
condition has cleared)
e. Pump alternation control (automatic reset only)
f.
Sampling (the relay is activated for a user-specified time)
g. Off (relay state controlled by Interlock feature)
3. Set
point
4. Reset
point
5. Fail-safe
operation
a. On
(enabled)
b. Off
(disabled)
6. Time
delay
a. On delay (0-999.9 seconds)
b. Off delay (0-999.9 seconds)
7. Relay action for loss (break) of 4-20 mA input (ignore, on, off)