Model DFG-RS5 Digital Force / Torque Indicator
User’s Guide
10
4.2 Controls
Primary
Label Primary Function
Secondary
Label Secondary Function
Powers the indicator on and off.
Press briefly to power on, press and
hold to power off. Active only when
the home screen is displayed.
ENTER
Various uses, as described in the
following sections.
ZERO
Zeroes the primary reading and
peaks.
(UP)
Navigates up through the menu and
sub-menus.
MENU
Enters the main menu.
ESCAPE
Reverts one step backwards through
the menu hierarchy.
MODE
Toggles between measurement
modes.
(DOWN)
Navigates down through the menu
and sub-menus.
DATA
Stores a value to memory, transmits
the current reading to an external
device, and/or initiates automatic
data output, depending on setup.
DELETE
Enables and disables
Delete
mode
while viewing stored data.
UNITS
Toggles between measurement
units.
DIRECTION
Toggles between tension and
compression (or clockwise and
counter-clockwise) directions while
configuring set points and other menu
functions.
CLEAR
Zeroes the peak readings, but
retains the primary reading.
N/A
N/A
4.3 Menu navigation basics
Most of the indicator’s various functions and parameters are configured through the main menu. To
access the menu press
MENU
. Use the
UP
and
DOWN
keys to scroll through the items. The current
selection is denoted with clear text over a dark background. Press
ENTER
to select a menu item, then
use
UP
and
DOWN
again to scroll through the sub-menus. Press
ENTER
again to select the sub-menu
item.
For parameters that may be either selected or deselected, press
ENTER
to toggle between selecting and
deselecting. An asterisk (
*
) to the left of the parameter label is used to indicate when the parameter has
been selected.
For parameters requiring the input of a numerical value, use the
UP
and
DOWN
keys to increment or
decrement the value. Press and hold either key to auto-increment at a gradually increasing rate. When
the desired value has been reached, press
ENTER
to save the change and revert back to the sub-menu
item, or press
ESCAPE
to revert back to the sub-menu item without saving. Press
ESCAPE
to revert one
step back in the menu hierarchy until back into normal operating mode.
Refer to the following sections for details about setting up particular functions and parameters.
Note:
As described above, the smart connector retains all configuration and calibration data for the
sensor, which includes menu settings. As such, a sensor must be connected in order for menu changes
to be saved with that particular sensor. If a sensor is not connected and the
MENU
key is pressed, it is
possible to browse through the menu parameters and make changes, but changes will not be saved.
Содержание DFG-RS5
Страница 1: ...Model DFG RS5 Digital Force Torque Indicator...
Страница 2: ...Model DFG RS5 Digital Force Torque Indicator User s Guide 1...
Страница 34: ...Model DFG RS5 Digital Force Torque Indicator User s Guide 33...
Страница 35: ...Model DFG RS5 Digital Force Torque Indicator User s Guide 34 M 5251 1017...
