Model DFG-RS5 Digital Force / Torque Indicator
User’s Guide
15
7.6 External Trigger Schematic
14
GND
1
IN
22k
SWITCH UNDER TEST
GAUGE
+3.3V
TO MICROPROCESSOR
0.1 uF
GND
BAT54SLT1G
330 Ohm
(NO OR NC)
USER - SUPPLIED
8 DATA MEMORY AND STATISTICS
The DFG-RS5 has a storage capacity of 1,000 data points. Readings may be stored, viewed, and output
to an external device. Individual, or all, data points may be deleted. Statistics are calculated for the data
presently in memory.
To enable memory storage, select
DATA Key
from the menu, then scroll to
Memory Storage
and press
ENTER
. Then exit the menu. In the home screen, the data record number
0000
appears below the
primary reading. Press
DATA
at any time to save the displayed reading. The record number will
increment each time
DATA
is pressed. If
DATA
is pressed when memory is full the message “MEMORY
FULL” will be flashed at the bottom of the display and a double audio tone will be sounded.
To view, edit, and output stored readings and statistics, select
Memory
from the menu. The screen
appears as follows:
8.1 View Data
All the saved data points may be viewed. The record number is displayed, along with the corresponding
value and presently set unit of measurement. Any readings may be deleted individually. To do so, scroll
to the desired reading and press
DELETE
. The letter “D” appears to the left of the record number,
indicating that the indicator is in
Delete
mode, as follows:
0001 8.450 Nm
0002 9.220 Nm
0003
8.445 Nm
0004 8.895 Nm
D
0005 9.095 Nm
0006
8.990 Nm
0007 9.045 Nm
MEMORY
View Data
View Statistics
Output Data
Output Statistics
Output Data & Stats
Clear All Data
Содержание DFG-RS5
Страница 1: ...Model DFG RS5 Digital Force Torque Indicator...
Страница 2: ...Model DFG RS5 Digital Force Torque Indicator User s Guide 1...
Страница 34: ...Model DFG RS5 Digital Force Torque Indicator User s Guide 33...
Страница 35: ...Model DFG RS5 Digital Force Torque Indicator User s Guide 34 M 5251 1017...
