![background image](http://html2.mh-extra.com/html/omega/compact-cal-ca100/compact-cal-ca100_owners-manual_5154776034.webp)
Using the RS-232-C Interface
33
24 V DC Power Supply
Using the RS-232-C Interface
RS-232-C Interface Functions
Reception Function
Allows you to make the same settings (except for on and off of the power supply and
those related to communication) as those which can be made using the keys on the front
panel. This function allows the instrument to receive a request for the output of a
generated set-up value, measured value, panel set-up information and error codes.
Transmission Function
Allows the instrument to output a generated set-up value and measured value at a
specified cycle. The panel set-up information and status byte can also be output. In
addition, error codes which occurred can be output.
Note
• During the talk-only or printer mode (when the printer is connected), only output of the generated
set-up value and measured value at a specified cycle is available.
• When using any source other than an AC power supply, the power supply to the circuit for the RS-
232-C is turned off to increase the operating time available with batteries or the like. Turn on the
power supply as necessary. (See page 37.)
Specifications
WARNING
When connecting the RS-232-C cable to the connector, make
sure the power switch of the instrument is turned OFF. Connect
the RS-232-C connector to the remote instrument with the cable
before starting the RS-232-C communication.
Electrical characteristics: Conforms to EIA RS-232-C.
Connection:
Point-to-point
Communications:
Full-duplex
Synchronization:
Start-stop system
Baud Rate:
150, 300, 600, 1200, 2400, 4800 and 9600
Start Bit:
1 bit (fixed)
Data Length:
7 or 8 bits
Parity:
Even, odd or no parity
Stop Bit:
1 or 2 bits
Connector:
DELC-J9PAF-13L6 (JAE or equivalent)
Hardware Handshaking: User can select whether RS and CS signals will always be
true, or be used for control.
Software Handshaking: User can select whether to control only transmission or both
transmission and reception using X-on and X-off signals.
X-on (ASCII 11H)
X-off (ASCII 13H)
Receiver Buffer Size:
256 bytes
Free Datasheet http://www.datasheet-pdf.com/