![background image](http://html2.mh-extra.com/html/omega/compact-cal-ca100/compact-cal-ca100_owners-manual_5154776030.webp)
Generation
29
5
Specify the voltage frequency to generate.
•
Using [ ] or [ ]
Press [ ] or [ ] to specify the voltage frequency to generate from the rightmost
digit. To reset the value to zero, press [ZERO CLR].
•
Using the numeric keypad
Enter a voltage frequency to generate using the numeric keypad and the decimal
point key (if applicable), and press the [NEXT ENTER] key. The figure flickers
when entering a value.
When entering decimals, press the decimal point key first and then the
appropriate key or keys on the numeric keypad.
If a value out of the voltage frequency range is specified, an error occurs. In this
case, press [ZERO CLR] to reset to the previous value, and reenter a new value.
6
Press [NEXT ENTER].
[
V] is displayed.
7
Specify a voltage to generate between 0 and 10 V.
•
Using [ ] or [ ]
Press [ ] or [ ] to specify the voltage to generate from the rightmost digit. To
reset the value to zero, press [ZERO CLR].
•
Using the numeric keypad
Enter a voltage generated using the numeric keypad and the decimal point key,
and press the [NEXT ENTER] key. The figure flickers when entering a value.
When entering decimals, press the decimal point key first and then the
appropriate key or keys on the numeric keypad.
If a value out of the 10 V range is specified, an error occurs. In this case, press
[ZERO CLR] to reset to the previous value, and reenter a new value.
8
Press the [SOURCE ON] key to start generation.
[ON] is displayed.
To stop the generation, press [SOURCE ON] again.
[OFF] is displayed.
Note
• When outputting, if you change the generation function or generation range, output turns off
automatically.
Free Datasheet http://www.datasheet-pdf.com/