![background image](http://html2.mh-extra.com/html/omega/compact-cal-ca100/compact-cal-ca100_owners-manual_5154776048.webp)
Maintenance
47
Commands for Calibration
The following communications commands are available for calibration. Before
executing these commands, see the descriptions on pages 41 to 46.
AG
Turns the averaging function on and off/queries the
current setting.
Syntax for setting
AGm <terminator>
m=0: Averaging is off.
1: Averaging is on.
Syntax of query
AG? <terminator>
Example of response
AG1
CD
Specifies and queries the generation data.
Syntax for setting
CDm <terminator>
"m" represents the generation
value of DCV, DCA, or resistance.
Syntax of query
CD? <terminator>
Example of response
CD100.000
Description
• The generation value is
configurable within a range as
wide as can be keyed in at each
range. Set the value, however,
within the recommended limits
of the given calibration point.
Any setpoint exceeding these
limits will result in error code 16.
Example: For a calibration point
of DCV 100 mV, the range is
-999.999 to 999.999.
CL
Makes calibration item setting/queries the current
setting.
Syntax for setting
CLm <terminator>
m=3: Calibration of generation
4: Calibration of measurement
Syntax of query
CL? <terminator>
Example of response
CL3
CMF
Specifies the calibration function for measurement/
queries the current setting.
Syntax for setting
CMFm <terminator>
m=0: DCV
1: DCA
2: Resistance
Syntax of query
CMF? <terminator>
Example of response
CMF0
CP
Makes calibration point setting/queries the current
setting.
Syntax for setting
CPm <terminator>
Calibration for generation:
DCV
DCA* Resistance
m=0: FS
(S)FS
+FS
1:0
(S)0
0
2:-
-
-FS
3:-
-
-0
*(S) is for SINK.
Calibration for measurement:
DCV
DCA
Resistance
m=0:+FS
+FS
+FS
1:0
0
0
2:-FS
-FS
-
Syntax of query
CP? <terminator>
Example of response
CP0
CS
Confirms the measured data when calibrating a
measurement, and inputs and queries the DMM
measured values.
Syntax for setting
CSm <terminator>
"m" represents the measured value
of DMM.
Syntax of query
CS? <terminator>
Example of response
CS1.00000
Description
• The measured value for a DMM
is configurable within a range as
wide as can be keyed in at each
range. Set the value, however,
within the recommended limits
of the given calibration point.
Any setpoint exceeding these
limits will result in error code 16.
Example: For a calibration point
of DCV 10 V, the range is
-99.9999 to 99.9999.
CSF
Specifies the calibration function for generation/queries
the current setting.
Syntax for setting
CSFm <terminator>
m=0: DCV
1: DCA
2: Resistance
Syntax of query
CSF? <terminator>
Example of response
CSF0
Description
• If the function is changed during
generation, the generation is
turned off. To turn on the
generation, issue an SO
command again.
Free Datasheet http://www.datasheet-pdf.com/