![background image](http://html2.mh-extra.com/html/omega/compact-cal-ca100/compact-cal-ca100_owners-manual_5154776059.webp)
Appendix
App-3
SD
Sets generated value/queries the current setting.
Syntax for setting
SDm <terminator>
DCV
(100 mV) m = -10.000 to
110.000
(1 V) m = -0.10000 to 1.10000
(10 V) m = -1.0000 to 11.0000
DCA
(20 mA) m = 0.000 to 22.000
(SINK) m = -22.000 to 0.000
Resistance
(500
Ω
) m = 0.00 to 550.000
(5 k
Ω
) m = 0.0000 to 5.5000
(50 k
Ω
) m = 0.0000 to 55.000
RTD
(PT100) m = -200.0 to 850.0
TC
(K) m = -200.0 to 1372.0
(E) m = -250.0 to 1000.0
(J) m = -210.0 to 1200.0
(T) m = -250.0 to 400.0
(R) m = -40.0 to 1767
(N) m = -200.0 to 1300.0
(B) m = 400.0 to 1820
Frequency/Pulse frequency
(100 Hz) m = 1.0 to 110.0
(1 kHz) m = 90 to 1100
(10 kHz) m = 0.9 to 11.0
(50 kHz) m = 9 to 50
Frequency DCV/Pulse DCV
(10 V) m = -1.0000 to 11.0000
Pulse
m=1 to 60000
Syntax for query
SD? <terminator>
Example of response
SD100.000
SF
Sets the generated function/queries the current setting.
Syntax for setting
SFm <terminator>
m=0: DCV
1: DCA
2: Resistance
3: TC (thermocouple)
4: RTD (resistance temperature
detector)
5: Frequency
6: Frequency DCV
7: Pulse
8: Pulse DCV
9: Pulse frequency
Syntax for query
:
SF? <terminator>
Example of response
SF0
Description
During generation, if the function
is changed, generation is turned
off. The generated value is also
reset to zero.
SO
Starts/Stops generation/queries the current setting.
Syntax for setting
SOm <terminator>
m=0: Generation stop
1: Generation start
Syntax for query
SO? <terminator>
Example of response
SO1
SR
Sets the generation range/queries the current setting.
Syntax for setting
SRm <terminator>
DCV
Resistance
m= 0: 100 mV 500
Ω
1:1 V
5 k
Ω
2:10 V
50 k
Ω
RTD
TC Frequency/Pulse
frequency
m=0: -
B
100Hz
1: PT100
E
1 kHz
2: -
J
10 kHz
3: -
K
50 kHz
4: -
N
-
5: -
R
-
6: -
T
-
Syntax for query
SR? <terminator>
Example of response
SR1
Description
• Frequency DCV and pulse DCV
are fixed in a 10 V range. The
pulse function has no range
setting, either.
• During generating, if the range is
changed, generation is turned off.
The generated value is also reset
to zero.
• SR command is unavailable for
switching the current function
source/SINK. Use the AS
command.
SY
Switches between the normal and calibration modes/
queries the current setting.
Syntax for setting
SYm <terminator>
m=0: Normal mode
1: Calibration mode
Syntax for query
SY? <terminator>
Example of response
SY1
Description
• If a command for the calibration
mode is received during the
normal mode, error 13 occurs.
UP
Moves up the "m-th" digit of the generated value by one
digit.
Syntax for setting
UPm <terminator>
m=1 to 5
Description
:
• This command has no query.
• This is valid only when the UP/
DOWN key is selected.
Free Datasheet http://www.datasheet-pdf.com/