Olympus USG-400, Руководство по обслуживанию

Страница: 68 / 90

USG-400
Troubleshooting 8-2 ISSUE1
1 Troubleshooting
WARNING
If the ultrasonicIf the ultrasonic generator does not work after the
touch-screen displays irregularity, turn the ultrasonic
generator OFF and then turn it ON again. Confirm that the
output level setting returns to the normal state.
Never use the ultrasonic generator on a patient when any
irregularity is observed with the equipment. Otherwise, the
system may not work properly and serious injury to the
patient, surgical staff and/or surgeon may result.
If any irregularity is observed with the equipment, follow the below steps.
1.
Immediately stop the procedure and remove any equipment from inside the
body cavity.
2.
Immediately stop the procedure and remove any equipment from inside the
body cavity.
3.
Check if any error window is displayed.
4.
If an error window is displayed, first read Section 2, “Error screen” and
Section 3, “Troubleshooting guide” and take proper remedial actions
according to “What to do when an error code is displayed”
5.
If no error window is displayed, take proper remedial actions according to
“What to do when no error code is displayed”