37
4 Basic operation
Multi-image view (thumbnail screen)
3
Short-press the [LIVE/GAIN] button or long-press the [VIEW] button to return to
the live screen.
The thumbnail screen shows multiple recorded movie and still images on a single screen (nine im-
ages per screen).
You can use the thumbnail screen to search for a desired image, or to select multiple images to
move them or delete them.
1
Select the folder of the save destination.
See "4.3 Switching the folder from the live screen" (P. 31) for details about operations.
2
While the live screen, freeze screen, or retrieve screen is displayed, long-press
the [VIEW] button.
This will display a multi-image view of recorded images (up to nine images per screen).
A movie image is indicated by the movie image indicator (
).
The measurement indicator (
) is displayed on the measured image.
To select a thumbnail
Move the [MEAS/ENTER] joystick up, down, left or right to move the selection boundary
around the screen
The thumbnail where the selection boundary is located is the currently selected image.
To play back an image
Select the image you want to play back and then short-press the [MEAS/ENTER] joystick.
This starts full-screen view playback of the selected image.
To select multiple images to move or delete them
Selecting an image and then pressing the [BRT] lever toward [
▲
] will put a check mark (
) in
the upper right corner of the thumbnail image. After selecting all of the images you want this
way, you can then perform the required menu operations to move or delete them.
●
To select all thumbnails
Pressing the [BRT] lever toward [
▼
] will put a check mark (
) in the upper right corner of all
thumbnail images.
●
To remove a check mark
From a specific image only
Select the image whose check mark you want to remove, and press the [BRT] lever toward [
▲
].
From all thumbnails that have check marks (
)
Press the [BRT] lever toward [
▼
].
●
NOTE
