DP30BW
4
1. The camera head uses precision components. Handle it with care and avoid subjecting it to a sudden or severe impact.
2. The image displayed on the monitor may be affected when it is used near equipment generating strong electromagnetic
waves. This is not a malfunction and will not affect the actual image being recorded. To avoid interference during
operation, keep the system far from any source of electromagnetic waves.
3. When mounting the camera head on a tripod, attach it by using the DP-TRAD tripod adapter, which is separately available.
4. Do not use the camera in areas where it may be subjected to direct sunlight, high temperature and humidity, dust or
vibrations. For the operating environment conditions, see Chapter 8, “SPECIFICATIONS” on page 22.
5. Do not disassemble any part of the camera as this could result in malfunction or reduced performance.
3
Caution
If the camera system is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,
the camera may also be damaged. Always use the equipment as outlined in this instruction manual.
The following symbols are used to set off text in this instruction manual.
: Indicates that failure to follow the instructions in the warning could result in bodily harm to the
user and/or damage to equipment (including objects in the vicinity of the equipment).
# : Indicates that failure to follow the instructions could result in damage to equipment.
} : Indicates commentary (for ease of operation and maintenance).
Recorded picture data may be lost (or destroyed) in any of the following cases. Please note that
Olympus assures no liability for loss of recorded data. The user is recommended to back up the
recorded data periodically.
· Improper handling of the external storage device such as a FD, MD or HD by the user or a third
party.
· Unauthorized servicing buy the user or a third party.
· Result of disconnection of the interface cable or setting the PC main switch to “ ” (OFF) in the
middle of recording or erasure (including initialization) operation.
· General equipment failure.
2
Getting Ready
Data Storage Caution
