17
Image recording procedure using the optionally available basic software for the DP30BW “DP-BSW" is describe below.
(Note) The encircled numbers indicate the control positions in the windows shown on the next page.
For detailed operating procedures, refer to the Online Help of the DP Controller and DP Manager.
IMAGE RECORDING PROCEDURE
Start DP Controller.
Start DP Controller.
Set up the microscope.
Fluorescence Observation
Brightfield Observation
Set up the microscope.
Display the preview image.
Display the preview image.
Set the exposure mode.
Set the exposure mode.
Exposure mode?
Manual
Exposure mode?
Manual
SFL Auto
Set the exposure time.
Auto
Set the exposure time.
Select the metering area (30%,
1% or 0.1%).
Select the metering area (30%,
1% or 0.1%).
Adjust framing and focusing.
Adjust framing and focusing.
Manual
Exposure mode?
Manual
SFL Auto
Fine-adjust the exposure time.
Auto
Fine-adjust the exposure time.
Move the metering area and
correct exposure.
Move the metering area and
correct exposure.
Adjust the black balance.
Record an image.
Record an image.
Select DP Manager.
Select DP Manager.
Exposure mode?
Perform zooming and scrolling.
Perform zooming and scrolling.
Save the image.
Save the image.
³
|
@
²
³
ƒ
…
†
‡
Š
³
|
@
²
³
ƒ
†
‡
Š