DP30BW
12
14. When the [System Properties] dialog box is displayed, click
on the [Hardware] tab and then click on the <Device Man-
ager> button.
15. If the driver has been properly installed, “MalAd Device”
should be displayed as shown below. After confirming this,
click on the < > button.
Now the device driver installation is complete.
1. Ensure that the PCI interface/IO board is installed in the
PCI card slot of the PC.
2. Start Windows 2000. (Log on with the Administrator account.)
3. When the following window appears in a while, click on the
[Next] button.
4. Check [Search for a suitable driver for my device (recom-
mended)] and click on the [Next] button.
5. Place the CD-ROM in the CD-ROM drive.
6. Check only [Specify a location] (be sure to uncheck other
options), and click on the [Next] button.
7. Click on the [Browse] button.
2. Windows
R
2000