Olympus DP21, Инструкция по эксплуатации

Страница: 76 / 98

72
3-5 DP2-TWAIN Software Installation
· Quit all running applications before installing DP2-TWAIN.
· The software cannot be installed unless the user account is registered as “computer administrator.”
If the user account is registered as a “Restricted account,” change it to the “Computer administrator” account.
(For the user account registration, refer to the instruction manuals for your computer.)
When using a commercially available IEEE1394 board, install it in the PC before installing DP2-TWAIN.
Before Installation
Trademark Information
Windows is a registered trademark of Microsoft Corporation.
All other brand and product names are trademarks or registered trademarks of their respective owners.
1. Windows R Vista
1. Start Windows Vista. (Log on with the Computer Adminis-
trator account.)
2. Insert the CD-ROM in the CD-ROM drive.
3. When the [AutoPlay] window appears, click on [Run
setup.exe].
4. When the [User Account Control] window appears, click on
the [Allow].
CAUTION
When the DP2-TWAIN is installed, the 1394 driver is also replaced with the dedicated driver for the
DP21. This makes it impossible to use other IEEE1394 devices. If you want to use an IEEE1394 device
other than the DP21, see “DP-21 TWAIN Software Uninstallation (p. 81).”