Olympus DP21, Инструкция по эксплуатации

Страница: 2 / 98

Notations Used in This Manual
This system is used either in a standalone (SAL) or PC-connection (PC) configuration.
Each page of this manual carries one of notations “Common,” “SAL” and “PC” on the top right to indicate the applicable
configuration of the descriptions in it. Please read the pages applicable to your configuration.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
In accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment,
this symbol indicates that the product must not be disposed of as unsorted municipal waste, but
should be collected separately.
Refer to your local Olympus distributor in EU for return and/or collection systems available in your
country.
CALIFORNIA USA ONLY
This control box uses a Lithium Battery which contains Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
This device complies with the requirements of both directive 2004/108/EC concerning electromagnetic com-
patibility and directive 2006/95/EC concerning low voltage.
3. PC Connection System (PC) p.67 to p.81
This chapter describes the operation of the configuration in which the camera head is connected to
a desktop or laptop PC.
4. General (Common) p.82 to p.87
This chapter describes the specifications and troubleshooting information.
2. Standalone System (SAL) p.5 to p.66
This chapter describes the operation of the configuration in which the camera head is connected to
the control box.
1. Important (Common) p.1 to p.4
This chapter describes the cautions related to the safety and operation of the system.