Olympus DP21, Инструкция по эксплуатации, Страница: 64 / 98

60
2-9 Functions Interlocked with Microscope Operations
When the DP21 is connected to a microscope (BX43, BX53 or BX63) through a control box (U-CBS, etc.), the following
functions interlocked with the microscope are available.
Function Description Required units
Auto scale
switching When the objective in the revolving nosepiece of the microscope is
switched, the displayed scale is automatically switched according to the
newly selected observation magnification.
*
It is necessary to input the magnifications of the objectives in use in
advance. For the input method, see “Auto scale switching (page 64).”
· Control box
(U-CBS/U-CBM/BX3-CBH)
· Revolving nosepiece
(U-D7RES/U-D7REA)
Shutter switch The camera shutter switch can be installed on the microscope to facilitate
image recording during observation through the microscope. · Control box
(U-CBS/U-CBM/BX3-CBH)
· Revolving nosepiece
(U-D7RES/U-D7REA)
· Hand switch for exposure
(U-HSEXP)
Guidance The guidance on the operating procedures of the microscope and cam-
era can be displayed. · Control box
(U-CBS/U-CBM/BX3-CBH)
· Revolving nosepiece
(U-D7RES/U-D7REA)
2-9-1 System chart
DP21-CB U-CBM
U-CBS
U-CBS
BX3-CBH
U-D7REA
U-D7RES
U-HSEXP
U-D7RES
U-D7REA
U-D7RES
U-HSEXP
Control box
Revolving nosepiece/
Hand switch for Exposure
For connection to the U-CBS. (P. 61)
For connection to the U-CBM. (P. 62)
When using the U-D7RES, the U-CBS should
be used.
For details, read the instruction manual for the
U-CBM.
For connection to the BX3-CBH. (P. 62)
}It is also possible to connect the camera to the microscope without using the U-HSEXP. In this case, the shutter switch
function cannot be used.