162
E
4
The subject is not within the working range of the camera
or is difficult for the autofocus to lock on.
[
See the working ranges of the Standard mode and
Macro mode, or refer to the Autofocus section. (P.92/84)
The flash does not fire.
1
The flash is not set.
[
Push the Flash pop-up lever to set the flash. (P. 82)
2
The flash is being charged.
[
Wait until the Orange lamp stops blinking. (P. 94)
3
The subject is bright.
[
Use the Fill-In flash mode. (P. 102)
4
When the
indicator lights on the control panel with the
flash set, the flash is out of order.
[
Have it repaired.
The pictures just taken do not appear on the LCD
monitor.
1
The power is off or the Record mode is on.
[
Set the Record/Play switch to Play, and turn on the
power. (P. 106)
2
There is no picture in the SmartMedia
[
Check the control panel. (P. 106)
The LCD monitor is hard to read.
1
Brightness setting is wrong.
[
Select BRIGHTNESS from Menu in the Play mode,
and perform the required adjustment. (P. 128)
2
The sun is shining on the monitor.
[
Block the light with your hand, etc.