168
E
The picture is too dark.
1
The flash was not used.
[
Push the Flash pop-up lever to set the flash. (P. 94)
2
The shutter was pressed before the flash was charged.
[
Wait until the Orange lamp stops blinking. (P. 94)
3
The flash was blocked by a finger.
[
Hold the camera correctly, keeping your fingers away
from the flash. (P. 72)
4
The subject was out of the working range of the flash.
[
Shoot within the flash working range. (P. 94)
5
The subject was too small and was backlit.
[
Set the flash to Fill-In mode or use the Spot metering
mode. (P. 102/86)
The picture is too bright.
1
The flash was set to the Fill-In Flash mode.
[
Set the flash mode to one other than Fill-In Flash. (P.
96)
2
The subject was very bright.
[
Either adjust the exposure (P. 120) or point the
camera away from overly bright subjects.
The colors of pictures taken indoors look unnatural.
1
The lighting fixture(s) affected the picture.
[
Set the flash mode to Fill-In. (P. 102)
The picture has obscured edge(s).
1
The lens was partly blocked by a finger or the strap.
[
Hold the camera correctly, keeping your fingers and
the strap away from the lens. (P. 72)
