olympia electronics BS-429/W, Быстрое руководство по установке

Страница: 16 / 28

Page 16 921468007_90_005
7.3 Wireless keypad activation
Cases where the screen remains open are:
a) In the technician menu and user menu.
b) If countdown is in progress (entry or exit time).
c) When activated and the siren sounds, it will remain active for as long as it sounds.
d) When the key is pressed, the time before the display is turned off is renewed.
e) When it detects the user's hand close although there is no key pressed.
f) When a code is entered for arming - disarming or for entering a menu.
When the LCD screen of the device is turned off, it is enough to slightly press the
keys with the palm to activate it. As soon as it is switched on, the key illumination is
on too. At this stage the keys are locked, and every three seconds a message
prompts the user to press the "*" key to unlock the keypad. Until this key is pressed,
no other key is activated if it is pressed and the buzzer does not sound when the
keys are pressed. Once "*" is pressed, the keypad is unlocked and the buzzer will
now sound when a key is pressed. When the keyboard unlocks, the symbol (
✔
) is
displayed for a while, indicating that the keypad was unlocked.
IMPORTANT: The panic button is detected even when the keypad is locked.
Therefore, once the device is switched on, it is not necessary for the user to press
"*" first, but can press "#" for 5 seconds and send a panic alarm.
7.4 Basic handling and settings
The panel has 1 main code (master code) which by default is set to "1 2 3 4" and up-
to 50 user codes which by default are not programmed. The system can operate in
two different modes. Depending on the mode of operation, the arm and disarm
operations differ.
Arm , disarm , silent alarm and panic alarm on BS-468/A can be activated through RF-
467 telecontrol , which is given (2 pieces) preinstalled . For more information
regarding the installation and usage of these devices, please refer to last 3 pages of
this guide.
Complete System
In this case the system arms and disarms altogether.
Arming can be achieved by using the master code or one of the user codes. The
arming of the system can also be succeeded by simply pressing the ABC key, if during
the installation, the option
"ARM WITHOUT CODE" has been selected.
Disarming can be achieved by entering the master code or one of the user codes.
Split System
In this case the system operates as three independent subsystems. You can arm and
disarm the whole system or each subsystem independent from the others.
Arming of the whole system can be done by using the master code or one of the
user codes that have been programmed for general arming. The arming of the