olympia electronics BS-429/W, Быстрое руководство по установке

Страница: 11 / 28

Page 11 921468007_90_005
home screen and then enter the user menu. Now it is time to change the Master
user code from "1234" to another of your choice. This code will be used to arm and
disarm the whole system when exiting or entering the guarded area. This is done by
selecting "MASTER OR TECH MENU"

1 2 3 4

"CODES"

"CHANGE MAIN
PASSWORD". Through the "CHANGE PASSWORD" option the user can create or
change user's codes.
4.2 Installation completion
All the above steps were the main settings in order to make a system operational.
The user can also refer to the technical manual in order to enter extra passwords, to
put automated timer operations and use the system's outputs (e.g. to turn on lamps
in some events or to drive external sirens). If you have purchased a GSM or PSTN
extension, refer to the corresponding paragraphs of the BS-468/A technical manual,
as well as these devices' manuals, to install them on the system. The installation
procedure has come to its end. You have set up an operating system and you know
all the basic details to operate this system. You can try an arm - disarm test to check
that this function is running properly.
CAUTION!!! For optimal system operation, when entering a password either
to enter or exit the guarded area, do not type something on the keypad or open -
close doors or windows, while the message "PLEASE WAIT" appears. Wait for the
message to disappear and make sure the system responded correctly to the code
(e.g., the exit countdown was started or the timer has stopped after input).
5. DEVICES INSTALLATION
5.1 Generals
CAUTION : If the user leaves the technician menu during installation, then an
alarm will be raised and heard from the siren if some device has its tamper spring
free. When leaving the technician menu, the siren will not sound for existing alarms
(e.g. already activated tampers). If no key is pressed for 15 minutes on the wireless
keypad, the keypad will return to the home screen itself (by going out of the tech
menu) and turn off the screen.