27
T
O
CHANGE
THE
REMOTE
CONTROL
CODE
If the fax machine is connected to an
extension
that oper-
ates in
tone dialling mode
and is set up for
manual
reception
, whenever there is a call from a correspondent
wishing to send you a document, you can
set it to receive
the document by typing the code
* *
on the extension. This
operation has the same effect as pressing the
key
on the fax machine.
You can replace the second "asterisk" of this code using
digits from 0 to 9.
If the fax machine is connected to an
external answering
machine
, we recommend you choose a different digit from
the one used to control the machine from a remote location.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
The display shows the line to which the fax machine was set
to be connected, for example:
PUBL.LINE (PSTN)
Until the display shows:
REMOTE START:ON
The display shows the code you set previously, for ex-
ample:
TYPE CODE
CODE(0/9,*) *8
-
Type the new code, for example: "*9".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
NOTE
If you want to disable this function, after the fourth step, press
the
|
/
}
keys to display: "REMOTE START:OFF", then press
the
key
to confirm and the
key to return the
fax machine to the initial stand-by mode.
nOTE
If you are connected to a private line, follow the same proce-
dure until the display shows "PUBL.LINE (PSTN)", press
the
|
/
}
keys to display: "PRIV.LINE (PBX)" and then con-
tinue as described in the procedure.
O
THER
USEFUL
TRANSMISSION
SETTINGS
T
O
CHANGE
THE
POSITION
OF
YOUR
NAME
AND
FAX
NUMBER
The information in the heading of the document to be sent
(name, fax number, date and time and number of pages)
may be received by your correspondent's fax machine
outside the text area immediately below the top edge of the
sheet or inside the text area, slightly lower down than in the
previous case.
Your fax machine is designed to send this information inside
the text area.
To change the position
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
HEADER INSIDE
|
/
}
To select the alternative parameter.
HEADER OUTSIDE
To confirm the setting.
To return the fax machine to the initial stand-by mode.
T
O
ENABLE
/
DISABLE
REPETITION
OF
A
FAILED
TRANSMISSION
FROM
THE
MEMORY
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
RETRANS.DOC.:OFF
|
/
}
To view the other available option: "RETRANS. DOC.: ON".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
Содержание Jet-Lab 490
Страница 1: ...INSTRUCTIONS Ink Jet Fax Fax Lab 450 Jet Lab 490...
Страница 6: ......
Страница 46: ......
Страница 48: ...255933Y...
