26
T
O
CHANGE
THE
LENGTH
OF
THE
ACOUSTIC
SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for
automatic reception
with recognition of the type of call
, it behaves as
follows:
•
if it is being called by a
fax machine
, it will automatically
prepare to receive a document after the preset number of
rings
•
if it is being called by a
telephone
, it will emit an
acoustic
signal
for a time of 20 seconds, after which, if you still have
not lifted the handset, it will automatically prepare to re-
ceive a document.
If you want, you can change the length of the acoustic signal
as follows:
Until the display shows:
INSTALLATION
Until the display shows:
FAX/TEL TIMER:20
|
/
}
To view the other available values: "15", "30" or "40". For
exemple: "40"
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
CHANGE
THE
SILENCE
LAPSE
This function is only enabled in some countries.
Remember that if the
silence lapse
set on the
external
answering machine is shorter
than the one set on the
fax machine, the latter will
never
be able to automatically
prepare to
receive
a document in that the answering ma-
chine is activated first and, if no answering message is
heard within the preset number of seconds,
it closes
the
connection.
At this point, you must
reduce
the
silence lapse
set on
your
fax machine
so that it connects to the line first.
To change the silence lapse set on your fax machine, pro-
ceed as follows:
Until the display shows:
INSTALLATION
Until the display shows:
SILENCE LAPSE.: 6
|
/
}
To view the other available values: "3", "4", "8", "10" or
"OFF". For exemple: "4".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
ENABLE
/
DISABLE
RECOGNITION
OF
THE
RING
FREQUENCY
In some countries, local telephone companies offer the pos-
sibility of
assigning the same telephone line two or
more numbers
, corresponding to different users. When
an incoming call is received, a
different ring frequency
will indicate which user is to answer the call.
This function is extremely useful in the home or small offices,
where the same telephone line is shared by more than one
person.
Your fax machine is capable of "learning" one of
these frequencies
(see the procedure that follows). In
this way, when a call with the specific ring frequency is
received, the fax machine (in "
PHONE/FAX
" and "
TAD/
FAX
" reception modes) prepares exclusively to receive a
document.
This function is
particularly useful when associated
with silent reception
in that the fax machine will only ring
if the call is coming from a telephone.
We recommend you
disconnect
the TAD before carrying
out the recognition procedure.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
Until the display shows:
ENHANCED FEATUR.
Until the display shows:
DISTINC.RING:OFF
|
/
}
Until the display shows:
CHANGE PATTERN
To confirm your choice. The display shows:
AUTODETECT. RING
Call the fax machine with the desired frequency so that the
fax machine detects it. The display shows:
RING DETECTED
To return the fax machine to the initial stand-by mode.
notE
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At
this point, press the
key and repeat the procedure.
Содержание Jet-Lab 490
Страница 1: ...INSTRUCTIONS Ink Jet Fax Fax Lab 450 Jet Lab 490...
Страница 6: ......
Страница 46: ......
Страница 48: ...255933Y...
