5
T
O
SET
THE
DATE
AND
TIME
The
first time
you
connect
the fax machine to the
power
supply
or whenever there is a
power failure
you must set
the date and time as described below.
Once set, the date and time can be changed at any time,
see the "
To change the date and time
" section.
The display shows:
DATE AND TIME
The display shows:
FORMAT: DD/MM/YY
|
/
}
If you want to select a different format from the one dis-
played.
The display shows:
FORMAT: 24 H
|
/
}
If you want to select the other time format (12-hour).
The display shows:
DD/MM/YY HH:MM
25-03-04 11:23
-
Enter the new date and time (e.g. 26-03-04; 12:00). As
each digit is entered, the cursor will move to the next one.
DD/MM/YY HH:MM
26-03-04 12:00
|
/
}
If you only want to change a few digits, move the cursor to
them using the
|
/
}
keys and overwrite them with the correct
digits.
To confirm the setting. The date and time setting procedure
has been completed. The new date and time will be up-
dated automatically and will be printed on each page sent.
To return the fax machine to the initial stand-by mode. Re-
member that the
stand-by mode
is the status in which it is
idle and that it is the mode from which the machine can be
programmed.
note
If you have chosen the 12-hour time format, the display will
show the letter "p" (post meridiem) or the letter "a" (ante
meridiem). To switch from one letter to another, move the
cursor to the letter to be changed, using the
|
/
}
keys, and
press the
key.
If you think you have made a mistake or want to abort the
procedure in progress for any reason, press the
key.
T
O
ADD
PAPER
1. Push the Automatic Sheet Feeder (ASF) into the slots until it clicks
into position.
2. Open the panel of the automatic sheet feeder, as indicated by the
arrow.
3. Holding the sheets by their upper edge, insert them by letting them
"drop" into the ASF without folding or forcing them.
4. Close the panel of the automatic sheet feeder, as indicated by the
arrow.
5. Push the sheets against the left side of the ASF using the adjusting
lever.
notE
If you add sheets to the ASF, make sure you place them
under
and not on top of those already present.
notE
The fax machine has a
memory
that enables it to
receive
up
to
50 pages
even if you do
not add any paper
.
T
O
CHECK
THE
FORMAT
SET
ON
THE
FAX
MACHINE
Once you have manually adjusted the automatic sheet feeder
(ASF), to
ensure that the fax machine works properly
,
check that the
printing format
set on the fax machine
corresponds
to the
size of paper
you intend to use.
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
Until the display shows:
PRINTER PARAMET.
Содержание Jet-Lab 490
Страница 1: ...INSTRUCTIONS Ink Jet Fax Fax Lab 450 Jet Lab 490...
Страница 6: ......
Страница 46: ......
Страница 48: ...255933Y...
