Olivetti Jet-Lab 490, Инструкция по эксплуатации

Страница: 27 / 48

21
T
O MAKE A CALL
When you engage the line by lifting the telephone handset , you
may use all the telephone functions available on ordinary telephones
sold on the market.
These also include the
R function (REGISTER RECALL, activated
by pressing the key) which provides access to the special serv-
ices made available by the company that manages the telephone
network.
You can also use the following functions:
• Call the correspondent using the fast dialling procedures set, see
"
To telephone with one-touch dialling " and " To telephone
with speed dialling ".
• Momentarily hold a telephone call by pressing the (HOLD)
key. The call is resumed as soon as the same key is pressed
again.
• Activate the " handsfree " function, by pressing the key
before or during a telephone call. This function is useful if you want
other persons at your end to take part in the conversation.
• Stop the correspondent from listening to a conversation
at your end of the line
, during a " handsfree " telephone call .
Simply press the key during the conversation. To enable the
correspondent to listen again, simply press the same key again.
T
O TELEPHONE WITH ONE
-
TOUCH DIALLING
CASE 1
Do not place the document in the ADF.
- Press the desired one-touch key, for example , for
more than one second. The display shows the digits of the
telephone number that you associated with it (see "
To set
one-touch and speed dialling ", chapter " Basic trans-
mission and reception operations "). If you also associ-
ated a name with it, the display will show this, too.
Once the number has been dialled, if the correspondent is
free, you can start talking. The display shows the length of
the call in minutes and seconds in the top right-hand corner.
NOTe
If you want to activate the "handsfree" function, having raised
the handset, press the key. The display shows:
REPLACE HANDSET
CASE 2
Do not place the document in the ADF.
Lift the handset to engage the line or press the key to
activate the handsfree function. The display shows:
OFF HOOK 00:00
And the length of the call in minutes and seconds in the top
right-hand corner.
- Press the desired one-touch key, for example . The
display shows the digits of the telephone number that you
associated with it (see "
To set one-touch and speed
dialling ", chapter " Basic transmission and reception
operations "). If you also associated a name with it, the
display will show this, too.
T
O TELEPHONE WITH SPEED DIALLING
Do not place the document in the ADF.
Lift the handset to engage the line or press the key to
activate the handsfree function. The display shows:
OFF HOOK 00:00
And the length of the call in minutes and seconds in the top
right-hand corner.
The display shows:
TEL CALL
CODE OR < >
- Type the desired speed dialling code, for example .
The display shows the digits of the telephone number that
you associated with it (see "
To set one-touch and speed
dialling ", chapter " Basic transmission and reception
operations "). If a name was also associated with it, the
display will show this, too.
Once the number has been dialled, if the correspondent is
free, you can start talking.
T
O TELEPHONE BY RUNNING A SEARCH IN
THE PHONE BOOK
Do not place the document in the ADF.
Lift the handset to engage the line or press the key to
activate the handsfree function. The display shows:
OFF HOOK 00:00
And the length of the call in minutes and seconds in the top
right-hand corner.
The display shows:
TEL CALL
CODE OR < >
|
/
}
To locate the telephone number or name of the correspond-
ent you want to call.
To start dialling.
Once the number has been dialled, if the correspondent is
free, you can start talking.