Olivetti Jet-Lab 490, Инструкция по эксплуатации

Страница: 35 / 48

29
S
ENDING
/
RECEIVING A DOCUMENT IN
POLLING MODE
F
IRST OF ALL
,
WHAT POLLING IS
It is a transmission request that a fax machine makes to another fax
machine so that the latter sends the document requested automati-
cally.
There are two main characteristics of communication using the polling
method:
• the user who is to receive the document requests trans-
mission
. In other words, a user may connect to another fax
machine and request it to send a document (specifically prepared)
to him, even when the user at the other end of the line is out.
• the transaction is paid for by the person who requested
transmission
(that is, the user who receives the document) and
not the person whose fax machine sends the document.
T
O MAKE A TRANSMISSION REQUEST
(
POLLING RECEPTION
)
Arrange with your correspondent the time at which you
intend to make the transmission request so that he has time
to put the document to be sent in his fax machine. Then set
up your fax machine to receive the document, by program-
ming the dialling mode to be used to call your correspond-
ent and the time at which you wish to receive the document.
Until the display shows:
POLLING RX
The display shows:
TYPE TIME
HH:MM
To confirm the current time or overwrite with the new one,
for example "18:20" and then press the . The dis-
play shows:
TYPE FAX NUMBER
NUM/TOUCH/SPEED
- Dial the correspondent's number using any of the available
methods: directly on the numeric keypad or using the one-
touch keys (
- ) or speed dialling codes.
To confirm the setting. The fax machine shows the message
"POLL SET" for a few seconds and then returns automati-
cally to the initial stand-by status. The second line of the
display shows: "POLL. RX: 18:20".
note
You can cancel the polling reception setting by pressing the
button.
T
O CHANGE
/
DELETE A POLLING RECEPTION THAT HAS
BEEN SET
Until the display shows:
POLLING RX
The display shows:
ALREADY ENTERED
The display shows:
CHANGE PARAM.?
|
/
}
To view the other available option: "CANCEL SETTING?".
To confirm your choice.
CANCEL SETTING? - To cancel the setting. The fax ma-
chine returns to its initial stand-by status.
CHANGE PARAM.? - To change the time at which the
transmission request is to be made or the number of the
correspondent from whom you want to receive the docu-
ment. The display shows:
TYPE TIME
HH:MM
From here on, proceed as indicated in the last three steps of
the procedure described in
" To make a transmission
request ".
T
O PREPARE THE DOCUMENT FOR TRANSMISSION
(
POLLING
TRANSMISSION
)
Place the document in the ADF. The display shows on the
top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR-
MAL.
The initial resolution value is: " " (standard).
If necessary, change the contrast and resolution values
(see "
To adjust the contrast and resolution ", chapter
" Basic transmission and reception operations ").
Until the display shows:
POLLING TX
Press the key twice. The second line of the display
shows: "POLLING TX SET".
NOTE
You can delete the polling transmission by removing the docu-
ment from the ADF or by pressing the key.