manualshive.com logo in svg

Olivetti d-Copia 1801MF Plus, Руководство по обслуживанию

Принтер Olivetti d-Copia 1801MF Plus - это высококачественное устройство, объединяющее функции печати, копирования и сканирования. Для обслуживания и ремонта этого устройства необходимо загрузить бесплатное сервисное руководство с сайта manualshive.com. Узнайте подробности о его функциях и возможностях, скачав руководство прямо сейчас.

Поделиться
Скачать
background image

2NC/2NF/2NG/2NN/3P7/3P8/3P9

2-3-6

7

Adjusting the left and right margins 
(printing adjustment)

LSU illumination start/end timing

U402

A Margin
C Margin

P.1-3-72

1. Press the start key.
2. Press the system menu key.
3. Press the start key. 

(output a test pattern)

4. Press the system menu key.
5. Select [A Margin] or [C Margin] to be 

adjusted.

1. Change the setting value using 

change keys * or numeric keys.

2. Press the start key. The value 

is set.

Completion: Press the stop key.

A margin will become large if a preset value is 
raised.

(Original:test pattern)

8

Adjusting magnification of the 
scanner in the main scanning direc-
tion 
(scanning adjustment)

Data processing

U065
U070

Y Zoom
X Zoom (F)/(B)

P.1-3-31
P.1-3-36

1. Press the start key.
2. Press the system menu key.
3. Set aoriginal and then press the start 

key. (output a test copy)

4. Press the system menu key.
5. Select [Main Scan] to be adjusted.

1. Change the setting value using 

change keys * or numeric keys.

2. Press the start key. The value 

is set.

Completion: Press the stop key.

U065: When using on the contact glass
If a preset value is raised, a picture will spread. 

U070: When using document processor
A picture will become long if a preset value is 
raised.

(Original:test pattern)

9

Adjusting magnification of the 
scanner in the auxiliary scanning 
direction 
(scanning adjustment)

Original scanning speed

U065

X Zoom

P.1-3-31

1. Press the start key.
2. Press the system menu key.
3. Set aoriginal and then press the start 

key. (output a test copy)

4. Press the system menu key.
5. Select [Sub Scan] to be adjusted.

1. Change the setting value using 

change keys * or numeric keys.

2. Press the start key. The value 

is set.

Completion: Press the stop key.

U065: When using on the contact glass
If a preset value is raised, a picture will spread. 

(Original:test pattern)

10

Adjusting the center line 
(scanning adjustment)

Adjusting the original scan data
(image adjustment)

U067

U072

Front

Front
Back

P.1-3-34

P.1-3-39

1. Press the start key.
2. Press the system menu key.
3. Set aoriginal and then press the start 

key. (output a test copy)

4. Press the system menu key.
5. Select the item to be adjusted.

U067: [Front] 
U072: [Front] or [Back]

1. Change the setting value using 

change keys * or numeric keys.

2. Press the start key. The value 

is set.

Completion: Press the stop key.

U067: When using on the contact glass
If a preset value is raised, a picture will move to 
the left.

U072: When using document processor
Back adjustment selects [Back] at the time of 
duplex mode.
If a preset value is raised, a picture will move to 
the right.

(Original:test pattern)

11

Adjusting the leading edge registra-
tion 
(scanning adjustment)

Original scan start timing

U066

U071

Front

Front Head
Back Head

P.1-3-33

P.1-3-37

1. Press the start key.
2. Press the system menu key.
3. Set aoriginal and then press the start 

key. (output a test copy)

4. Press the system menu key.
5. Select the item to be adjusted.

U066: [Front]
U071: [Front Head] or [Back Head]

1. Change the setting value using 

change keys * or numeric keys.

2. Press the start key. The value 

is set.

Completion: Press the stop key.

U066: When using on the contact glass
If a preset value is raised, a picture will move 
forward.

U071: When using document processor
Back adjustment selects [Back Head] at the time 
of duplex mode.If a preset value is raised, a pic-
ture will move forward.

(Original:test pattern)

12

Adjusting the leading edge margin 
(scanning adjustment)

Adjusting the original scan data
(image adjustment)

U403
U404

B Margin
B Margin

P.1-3-73
P.1-3-74

1. Press the start key.
2. Press the system menu key.
3. Set aoriginal and then press the start 

key. (output a test copy)

4. Press the system menu key.
5. Select [B Margin] to be adjusted.

1. Change the setting value using 

change keys * or numeric keys.

2. Press the start key. The value 

is set.

Completion: Press the stop key.

U403: When using on the contact glass
A margin will become large if a preset value is 
raised. 

U404: When using document processor
A margin will become large if a preset value is 
raised. 

(Original:test pattern)

Adjust-

ing order

Item

Image

Maintenance mode

Page

Setting procedure

Remarks

Item No.

Mode

Method

Setting

Содержание d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для d-Copia 1801MF Plus

Oki T400 Guía De Instalación preview
T400
Бренд: Oki Страницы: 36
Wasp WPL608 Quick Start Manual preview
WPL608
Бренд: Wasp Страницы: 2
Canon i9100 Series Setup Instructions preview
i9100 Series
Бренд: Canon Страницы: 2
Canon imageRUNNER C3480 Easy Operation Manual preview
imageRUNNER C3480
Бренд: Canon Страницы: 92
Oki C931dn Manual Del Usuario preview
C931dn
Бренд: Oki Страницы: 328
Xerox 4150S - WorkCentre B/W Laser Brochure & Specs preview
4150S - WorkCentre B/W Laser
Бренд: Xerox Страницы: 4
Evolis KU10E User Manual preview
KU10E
Бренд: Evolis Страницы: 45
Pantum P2800DW Series User Manual preview
P2800DW Series
Бренд: Pantum Страницы: 111
Xerox 6110MFP/XN Service Documentation preview
6110MFP/XN
Бренд: Xerox Страницы: 233
Delta OHM HD40.1 Manual preview
HD40.1
Бренд: Delta OHM Страницы: 28
DNP DS-ID400 Settings Manual preview
DS-ID400
Бренд: DNP Страницы: 10
Wasp WPL206 Series User Manual preview
WPL206 Series
Бренд: Wasp Страницы: 46
Riso MZ790U Instruction Manual preview
MZ790U
Бренд: Riso Страницы: 266
Kyocera TASKalfa 255 User Manual preview
TASKalfa 255
Бренд: Kyocera Страницы: 92
Xerox Phaser 6128 MFP Specifications preview
Phaser 6128 MFP
Бренд: Xerox Страницы: 4
Panasonic AGEP50 - COLOR VIDEO PRINTER Operating Instructions Manual preview
AGEP50 - COLOR VIDEO PRINTER
Бренд: Panasonic Страницы: 40
Dascom Tally DP-230L Quick Start Manual preview
Tally DP-230L
Бренд: Dascom Страницы: 2
WILLETT 430 Service Manual preview
430
Бренд: WILLETT Страницы: 207

Бренды по названию

Популярные бренды

Загрузить еще бренды