Oliver Packaging & Equipment Company
3236 Wilson Drive NW, Walker, MI 49534
(800) 253-3893
747-N BREAD SLICER
0747S20007
6-1
MAINTENANCE
Removing the Blade Frames
WARNING
ALWAYS UNPLUG THE SLICER BEFORE PERFORMING
ANY TYPE OF MAINTENANCE TASK.
•
Remove the lower and upper outfeed tables and bagging scoop (4 knobs). Pull
each table downward to remove.
•
Remove the front blade frame. Start with the two bolts on the bottom of the
frame and then remove the two bolts on the top of the frame. Use a ratchet
wrench with a 1/2” socket. Once the bolts are removed hold the blade frame by
the round sides and tip the frame down and pull out.
•
Remove the rear blade frame. Start with the two bolts on the bottom of the frame
and then remove the two bolts on the top of the frame. Use a ratchet wrench
with 1/2” socket. Once the bolts are removed hold the blade frame by the round
sides and tip the frame down and pull out.
•
Once the blade frames are out you have two options.
o
Change dull blades to sharp blades
See section titled “Changing the Blades”
o
Change to a different slice thickness
See sections titled “Replacing the Blade Frames” and “Changing
Slice Thickness”
KNOBS (4 PLACES)
LOWER OUTFEED TABLE
BAGGING SCOOP
UPPER
OUTFEED
TABLE
