Oliver 4265, Руководство пользователя, Страница: 42 / 70

42 | Page Oliver Machinery 4265 Jointer
7. Locate and loosen the set screws for locking the eccentric nuts as shows in the pictures:
8. The eccentric nuts should be fairly loose
once they are unlocked. Rotate the eccentric
nuts to align outfeed table and cutterhead.
9. IMPORTANT: While rotating the eccentric
nuts, ensure they are pushed against the
holding bracket. Leaving any gaps in
between may cause the table to shift
sideways.
10. Repeat the steps in “ Inspect Outfeed Table
Parallelism ” to verify adjustments.
11. When adjustments complete, retighten the
set screws to lock all outfeed table eccentric
nuts.
12. With the fence locked, gently rock the fence
to ensure the outfeed table is stable. If the
outfeed table is rocking, eliminate all gaps
between eccentric nuts and the bracket.
13. Adjust infeed / outfeed table parallelism
using the infeed table eccentric nuts. Repeat
the steps in “Inspect Outfeed Table
Parallelism” when making adjustments.
Again, leave no gaps between eccentric nut
and the bracket.
14. Lock all eccentric nuts when adjustments
complete.
15. With infeed table realigned, it may need
additional adjustments. See section “ Infeed
Table Adjustments ” for details.
16. Reinstall all panels and cutterhead guard
when all adjustments complete.