Oliver 4265, Руководство пользователя, Страница: 19 / 70

4265 Jointer OLIVERMACHINERY.NET 19 | Page
Inventory
Carefully unwrap the packaging and make sure all components are included in the shipment. Lay out all
items received and inventory them.
Item Description Quantity
1 T-Handle torx drivers (T-25) 2
2 Spare Cutter Inserts and Torx Screws 10 each
3 12/14 mm Combination Wrench 1
4 Metric hex wrench set (5,6,8 mm) 1 each
5 Push blocks 2
6 Cutterhead guard 1
NOTICE: If you cannot find the item in the list above, please check if they are still attached to the packaging
or inside the cabinet. Occasionally the item may have been pre-installed at the factory. Please refer to the
parts list section in this manual to ensure you have all the components to set up this machine.
NOTICE: This machine comes with various standard sized, non-proprietary parts. If any of these parts are
missing, we be happy to deliver them to you. To have the machine up and running as soon as possible,
you can also find these parts at your local hardware store.
Additional Items Recommended for Machine Setup
Item Purpose
Safety Glasses Protection
Disposable Gloves Protection
Paper Towel / Rags Cleaning
Rust Inhibitor Cast iron rust protection.
Straight edge Check alignments.
Metric Combination
Wrench Set Assembly and Maintenance
Metric Hex Wrench Set Assembly and Maintenance
Torque Wrench
Cutter inserts installation and for checking torx screw tension (52-60 lbs.-
inch).
T25 Star Bit Socket Cutter inserts installation.
Ring Terminal Connector
and Crimping Tool Connecting machine to power.
IMPORTANT: Always follow local electrical code for electrical work .