![background image](http://html2.mh-extra.com/html/okidata/ol810e/ol810e_service-manual_3693744102.webp)
Page: 51
Service Guide OL810e
Chapter 4 Adjustments
4.1.3 Engine Maintenance Mode
Note: This mode is used only by maintenance personnel, and it should not be released to the end users.
(1) To enter into the engine maintenance mode, turn the power on while holding ENTER and FORM
FEED keys down.
(2) Functions of this mode are selected by the menu.
(3) The way to exit out of this mode varies depending on the settings.
(4) There are following engine maintenance modes:
a) Head drive time setting Sets the drive time of the LED head.
b) Head width setting Sets the width of the LED head (39 or 40 chips).
c) Printing start position setting Sets the starting position of printing.
d) Drum count total display The total drum rotation count of the printer, as counted by the engine
section, is displayed on the LCD.
e) Drum count display The total image drum rotation count, as counted by the engine section, is
displayed on the LCD.
f) Standard tray paper feeding quantity setting Sets the amount of paper to be fed from the standard
tray.
g) High Capacity Second Paper Feeder paper feeding quantity setting Sets the amount of paper to
be fed from High Capacity Second Paper Feeder.
h) High Capacity Second Paper Feeder downloading table selection Selects the downloading table
of High Capacity Second Paper Feeder.
i) Power Envelope Feeder paper feeding quantity setting Sets the amount of paper to be fed from
Power Envelope Feeder.
j) Power Envelope Feeder downloading table selection Selects the downloading table of Power
Envelope Feeder.
k) Engine Reset All EEPROM areas used by the engine section are reset to factory default values.
The followings, however, are not reset:
- Menu Level-1
- Menu Level-2
Содержание OL810e
