![background image](http://html2.mh-extra.com/html/okidata/ol810e/ol810e_service-manual_3693744122.webp)
On A failure occurred in the
controller. n = Exception Code
10 An error was detected by
program ROM check.
20 An error was detected by font
ROM check.
30 An error was detected by
resident RAM check.
40 An error was detected by
EEPROM check.
50 An error was detected by
optional software ROM check.
60 An error was detected by
optional RAM check.
70 A failure occurred with the
Fan motor.
71 A failure occurred with the
fuser (timeout error etc.).
72 A failure occurred with the
fuser (thermistor open error).
73 A failure occurred with the
fuser (thermistor short error).
74 SSIO Error
80 I/F timeout occurred between
the main control board and the
operator panel.
Replace the main control
board.
Replace the main control
board.
Replace the main control
board.
Replace the main control
board.
Replace the EEPROM or
main control
Check the optional
software ROM board for
proper connection or
replace it.
- Check the optional
RAM board for proper
connection.
- Check the mounting
position of short plugs
and additional RAM
chips (see Section 7.4).
- Replace the optional
RAM board.
- Check the fan motor for
proper connection and
for any presence of
foreign matter in the fan.
See Section 6.5. 2-6).
- Replace the fan or the
main control board.
See Section 6.5.2 - 4.
See Section 6.5.2 - 4.
See Section 6.5.2 - 4.
- Check the connection
between the main control
board and the power
supply/sensor board.
- Replace the main
control board or sensor
board.
Check the operator panel
for proper connection.
- Replace the flexible
cable, operator panel or
main control board
Содержание OL810e
