![background image](http://html2.mh-extra.com/html/okidata/ol810e/ol810e_service-manual_3693744128.webp)
This message is displayed when
the printer cannot reset
automatically to exit from the
menu because there are data and
DLL's and macros having
temporary attributes when the
printer is changed from set mode
to another mode.
Normal operation.
Toner is running out.
This message is displayed
together with another message on
the first line.
Normal operation can be
continued.
Replace the toner
cartridge.
A fault occurred with the toner
sensor.
This message is displayed
together with another message on
the first line.
Normal operation can be
continued.
Replace the power
supply/sensor board.
This message is displayed
together with another message on
the first line.
Normal operation can be
continued.
- Replace the image
drum cartridge.
- After replacing the drum
cartridge, reset the drum
counter (refer to the
Printer Handbook).
Unavailable printer language was
designated by PJL command
(warning).
- To clear, press Recover
key when "CLEARABLE
WARNINGS=ON" is
being selected in the
MENU.
- Check the host
program.
The printer is in the power-saving
mode.
This message is displayed
together with another message on
the first line.
Normal operation.
Содержание OL810e
